ISPOFLEX 50 FC
Description
ISPOFLEX 50 FC is a one-component, high-modulus polyurethane sealant that cures on exposure to atmospheric humidity. It possesses excellent adhesion to sheet iron, aluminum, stainless steel, lead, copper, ceramic, wood etc.
- Body construction of cars, containers, caravans etc.
- Sealing and bonding of ventilation ducts, gutters and spouts etc.
- Sealing of sheet metal seams
- For vibration reduction in all type of sheet metal assembly works
- Sealing against water, air, gas and dust.
INSTRUCTIONS FOR USE
Surface preparation: Joint surfaces must be dry, clean and free of all contamination. Glass, metal and other nonporous surfaces must be free of any coatings and wiped clean with solvent. Cut opens the cartridge, screw on nozzle and cut off tip at desired angle. Take off the aluminum cover at the bottom of the cartridge. Insert cartridge in gun and apply the sealant bubble-free continuously into the joint. Fill the joint completely. Smoothen it by pressing with a spatula or similar apparatus.
CAUTION
- Avoid application below 5 °C and above 40 °C.
- Do not apply on frozen or wet surfaces or through standing water.
- Keep out of reach of children.
- Avoid contact with skin and eyes.
- Use in well-ventilated places.
- Do not breathe vapors.
- Do not smoke when using the product.
- Consult Material Safety Data Sheet for further information.
TECHNICAL INFORMATION
- Permanently flexible
- Fast reaction
- Non-sag consistency - Excellent thixotropic property
- Non-sticky / does not pick up dirt
- No change in volume
- Easy to gun, can be easily smoothed
- Over-paintable
- Conforms to the requirements of VOC content specifications in LEED credit EQc4.1 'Low- emitting products' of SCAQMD rule 1168
- Meets the French VOC requirements for class A+