D3 PARQUET GLUE
Description
ISPO D3 PAPRQUET GLUE is water based polyvinyl acetate resin adhesive. It has D3 standards. It is used to bond wood, parquet, massive pieces, paper and fabric products.
INSTRUCTIONS FOR USE
The application surface should be free from all sorts of dust, oil and dirt. The surface and environment temperature should be over +5°C during gluing operation. The humidity of the wooden material to be adhered should be between 8%-12%. The product is ready for direct use. Not advised to add water. Blend thoroughly before using and apply with a brush or roller. Apply evenly to the surface without any extreme amounts. (250 gr/m²) Close the cover of the pack tightly after use.
CAUTION
Protect from sunlight, freezing and moisture. Wear any liquid-tight rubber or vinyl gloves. Consult Material Safety Data Sheet for further information.
TECHNICAL INFORMATION
| Specification | Condition | Value | Method |
|---|---|---|---|
| Appearance | 25⁰C | Viscose liquid | Visual |
| Colour | 25⁰C | Pink | Visual |
| Odor | 25⁰C | Characteristic | Visual |
| pH | 25⁰C | 6-7 | DIN/ISO 976 |
| MFFT | 0-18⁰C | 5⁰C | DIN ISO 2115 |
| Viscosity | 25⁰C | 17000 ±4000 mPa.s | DIN EN ISO 2555 |
| Density | 25⁰C | 1.30 ±0.10 g/cm³ | ISO 3507 /DIN 12797 |
| Boiling Point | 100⁰C | 100⁰C | ISO 3924:2016 |
| Vapour Pressure | 20⁰C | 2300 Pa | TS/DIN EN 13016-2 |
| Solid | 105⁰C/3h | % 54±2 | DIN EN ISO 3251 |
| Solubility in Water | 25⁰C | Partly soluble | Visual |