ISPOFOAM CLEANER
Description
ISPOFOAM CLEANER is a solvent based aerosol spray cleaner, which cleans the non-dried polyurethane foam direct after application and the foam gun. It cleans the polyurethane foam from all surfaces, clothes, door, window frames, aerosol nozzle and prevents the drying of polyurethane foam in the application gun.
INSTRUCTIONS FOR USE
ISPOFOAM CLEANER can be used either with placing the spray head on the valve right next to it or with the foam gun. Spare the spray head from the plastic part and place it on to the valve and apply a little force for spraying. In order to clean the foam gun; turn upside down the can and place it on to the screwed part. Eject the aerosol with the trigger and clean the foam waste from inside the gun. You can use the spray for the unwanted and uncured foam as defined above.
CAUTION
Pressurized container. Keep away from fire, flame and hot surface. Do not expose to sunlight for a long time. Keep away children from environment. Provide ventilation. Use personal protective equipment. Do not contact with skin. In the event of contact body part, should wash with plenty of water on contact surface. If irritation and redness are observed on the skin, it should be saw the doctor. Can shouldn’t be fired and punctured. It should be sure that the can is empty completely before throw away. Look at Material Safety Data Sheet (MSDS) for more details.
PROPERTIES
- Appearance : Liquid – Aerosol
- Color : Clear
- Odor : Characteristic Solvent Odor
- Flash Point : < 0°C
- Density : 0,78 g/cm³
- pH : Not applicable
- Viscosity : Not applicable
- VOC % : % 100 (wt)